Detailed instructions for assembling a double bed, frequent errors
For many people, the purchase of furniture is a significant event. Headsets are not bought every day, I want them to last longer and be comfortable. Most try to assemble furniture at home on their own, but not everyone knows how to do it right. To better understand how to assemble a double bed, instructions will help, which describes all the nuances, without which this process can become quite problematic.
Content
Preparation of parts and tools
Before proceeding with the assembly, it is necessary to check the availability of all parts and accessories for the bed. Typically, the standard set includes:
- headboard;
- longitudinal side frames (drawbars);
- central frame;
- corner furniture (coupling);
- a set of size-appropriate screws;
- additional orthopedic base.
Assembling a double bed - it is not easy to assemble, this process requires accuracy as well as care. Work should begin clearly according to the instructions, where the assembly is described step by step, a list of the necessary tools and materials is given. First of all, you need to have screws, screws, bolts. Of the tools you will need screwdrivers with different tips, a screwdriver, a wrench. To assemble new models of beds can be used Euroscrews, for which specific keys are needed. Roulette will not be superfluous, since you will have to measure out parts of the details, and the level, to measure the accuracy of the angles.
Before starting to assemble the bed, you should remember the basic principles and requirements:
- assembly alone is inconvenient; it is better to do it together;
- the room should not be cramped, you need a place to lay out large parts, to take measurements and cut;
- bolts and screws do not immediately need to be fastened strongly, first all the parts must be assembled, and then only fasteners should be fastened;
- assembly instructions need to be stored, sometimes you have to redo something.
Key workflows
Assembling a bed of any kind consists of important processes, each of which is described in detail in the instructions.
Base
The assembly of the double bed begins with the installation of the base. The border of the base consists of three frames and a headboard. First of all, you need to connect these czars together. In different models for this there are suitable components in the form of corners, brackets, corner ties, interconnected by screws and bolts. Next, we fix the legs, they can be screwed separately to the frames or go bundled with the component parts.
The next stage is to attach the corners and shelves that are included in the kit to the top of the drawer. We align everything in a perpendicular surface and only then fix it to the end with screws.If the bed involves a lifting mechanism, then we attach it to the headboard on the side frames, making the play minimal. After all these preparations, we collect the base into a single whole and fasten the central back to the frames.
Frame
The main elements in the bed is its frame, which is a metal frame equipped with special slats that will not allow the mattress to bend in the future, thereby providing the sleeping spine with support for a comfortable sleep.
Standard model
In the standard model of a double bed there is a base, frame, headboard. Many people care about the question - how to assemble a double bed - it is necessary to assemble according to the instructions. It is not difficult if you have the necessary components and tools, adhere to a certain installation technology:
- first of all, with the help of corners we strengthen the side frames at a height of not more than 0.2 meters;
- set the steps at the same height;
- assemble the ribs - we fasten them five centimeters above our side frames;
- we fix the central frame. It is very important to make all accurate measurements, and fix it in the center using special angles.
At this stage, the assembly of the base is considered complete. On the frame is laid another bar in the center for the mattress pad. Then we tighten the assembled structure to the end with self-tapping screws, maintaining a certain distance of 10 cm. This will achieve optimal stiffness of the product. Wood details can be varnished as a protective coating and after two days on the bed you can sleep in comfort.
![Base assembly](https://ifurniture.bigbadmole.com/wp-content/uploads/2018/03/Dlya-sborki-karkasa-neobhodimo-posledovatelno-soedinit-vse-elementy.-Posle-etogo-nuzhno-kak-mozhno-silnee-zatyanut-vinty.-Dannuyu-protseduru-luchshe-vsego-budet-provodit-vdvoem.jpg)
With orthopedic base
One of the common types of double bed bases is orthopedic, the main advantage of which is the uniform distribution of the weight of the person sleeping on it, which does not give an additional load on the spine. The orthopedic base is a special-purpose structure that consists of a frame and lamellas. It is intended to provide the orthopedic function of the mattress. The base may be attached directly to the bed or be a separate component.
How to assemble a double bed with orthopedic base? For greater convenience, only the frame itself is assembled immediately, without lamellas. This will allow you to quickly quickly attach the base to the bed body. Before starting the assembly of the base around the perimeter, all the necessary parts are laid out in the right order. Using screws of the required diameter, the corners of the screed are fixed on the side of the frame. Next, connect the side frames, the front of the bed (headboard) and the central frame with bolts, but not tightening them to the end. When all the parts are clearly exposed and connected to each other at a perpendicular angle, you can tighten the fasteners well.
The metal rod is assembled into one product, legs are attached to it. Then we insert it into the perimeter of the base and tightly fasten the screws. For normal attachment of the lamella to the frame, we put lamella holders at their ends and, in turn, fix it in special holes on the base of the rod. We check that everything is well kept and the orthopedic base is stable.
With lifting gear
The instructions on how to assemble a double bed with a lifting mechanism are slightly different from the assembly instructions for the standard model. This is due to the complexity of the mechanism itself. But if you have at least a little experience in assembling and following the advice of a specialist, assembling such a mechanism will not be a problem.
The main difference from the assembly of the frame with an orthopedic base is that they use special wedge-shaped joints to connect the parts.
To achieve the result, it is necessary to insert the necessary parts into each other and press down with an effort to the stop. With these connections, the parts will hold tight.
According to the instructions for assembling a berth with such a mechanism, it is necessary, according to the sequence, to connect all the parts together with screws, and then tighten it well. The bed frame is attached to the body only by the lower part of the lifting mechanism, which is already fixed on it. Due to the bulkiness of the structure, assembly is best done together, one master will be extremely uncomfortable.
Then lamellas are installed. Begin from the front of the bed. We insert the part into a special slot, slightly bending it. After a characteristic click, the lamella is firmly fixed in the bar. We also insert all the remaining parts.
Headboard
An element of the bed, such as the head, may be a continuation of the bed or a separate part thereof. It can be soft, upholstered foam rubber, batting, or hard, in the form of shelves that will perform the necessary functions. After buying a berth, you can remake or improve your existing headboard with your own hands.
There are several methods for headboard upholstery. The desired result can be achieved using the carriage coupler technique. To do this, you need a dense fabric, a sheet of plywood, foam rubber, buttons for decoration, a drill. From the sheet of plywood we cut out the necessary size blank, the same size foam rubber, as well as upholstery fabric. We add all the components and put them on the main blank. We drill holes in the right places, put buttons with twine threaded into them and stretch them to the wrong side. The hem of the fabric and buttons are fixed on the wrong side with brackets, and with the cut of dense fabric we close the wrong side.
Using approximately the same methods, you can make the headboard an ornament of nails or in the form of soft squares. In some cases, according to the design of the bedroom, it will be appropriate to make the headboard from smooth boards.
A double prefabricated bed will look great when an improved element of the headboard is added to the design, both of a soft look and with a creative approach.
Additional equipment
The bed is the main component of the sleeping set. Sleeping places are located both in small apartments and in large apartments. Today, furniture designers offer more and more new and modern models with various additional equipment.
A box for storing bedding and linen is a rather useful thing. With its help, the problem of disorder is solved, blankets, pillows will be kept in order. If we are talking about a sliding mechanism, such a box should not be very large. Today, manufacturers offer modern models that have a continuation of the front of the head of the head in the form of a bedside table. It looks very unusual, original and comfortable. On such a prefix, you can put the necessary small things that you always want to have on hand - a phone, an alarm clock, a favorite book.
The super-fashionable beds have different lights. They can be located on the side of the bed, at the head of the bed and turned on by an inconspicuous button. These fixtures can easily replace bulky floor lamps and wall lights. The lamps in them are built in energy-saving, which will last for a long time, and their consumption will be minimal.
Common mistakes
How to assemble a double bed according to the instructions is a difficult question, even following all the requirements, you can make a number of mistakes that can lead to loss of time, incorrect assembly of the product. Typical errors include:
- beginners should not begin work with the assembly of massive and large parts. You need to start small, and there will be fewer errors;
- Before starting the assembly of furniture, the number of parts and fixtures is not verified with instructions; parts of furniture are not visible for chips, scratches, or damage;
- inattentive study of the instructions may adversely affect the assembly process - the parts may be similar to each other, which will lead to their incorrect connection;
- fasteners from the headset may be similar to each other, but used in different connections because of their diameter. And if in one case a long fastener can be used instead of a short one, then a short one will not be suitable for the role of a long fastener;
- collecting parts on a carpet or any other soft surface, it is possible to achieve that some parts are lost;
- most of the details of the bed are made of MDF, and if you make holes with a drill, the panels can burst. Bolts and screws are easily screwed in with a screwdriver;
- non-observance of the assembly sequence according to the instructions will cause the double bed with the lifting mechanism to be assembled incorrectly;
- if you don’t glue some parts with special glue, over time there will be no necessary density between them.
Having even a little experience with furniture and following the necessary instructions, you can assemble a double bed with your own hands. Such a berth will please its owners for a long time, providing a comfortable sleep.
Video